ADAMS RITE 7160 Electric Strike for Aluminum Jambs
ADAMS RITE 7160
Electric Strike for Aluminum Jambs
For use with mortise latches by other manufacturers
Approximately 1″ x 3⅜” x 1⅞” deep
Basic 7160 strikes have lip of proper length for 1¾” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, extended lip is available, specified by last dash number.
Fail Safe/Fail Secure
Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
¾” x 1-7/16″ x ⅝” deep. Bolt retainer jaw is made of stainless steel. Strike location must be centered on latchbolt.
Measures 1¼” x 4⅞”. Faceplate is flat, with radiused corners. Available in a wide range of architectural finishes.
Remote electrical control of any door equipped with one of the mortise type latchsets listed at right. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into hollow jamb sections as shallow as 1⅞”. Fits prep for 7560/7860.