Global Series TH1100EDTBAR “touch bar” style exit devices

TOUCH BAR EXIT DEVICES

Touch Bar TH1100EDTBAR
Global Series TH1100EDTBAR “touch bar” style exit devices are suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. Manufactured of extruded anodized aluminum, the TH1100EDTBAR is durable enough for the most demanding applications. A rim cylinder is not included, and the EDTBAR can also be used in conjunction with any of the exit device trims listed below.
Grade – ANSI A156.3 Grade 2
Warranty – 10 years

Specifications:

MATERIAL: Extruded anodized aluminum push bar, stainless steel springs
LATCH: Stainless Steel, 3/4” throw – 5/8” deadlatch
BACKSET: 2 3/4” Covers 161 prep, includes latch & strike filler plates
STRIKE: Surface mounted for 5/8” stop with shim
PROJECTION: 2 1/2” – 1 7/8” dogged
STILE: 4 1/4” minimum
HANDING: Reversible, non-handed
DOOR THICKNESS: 1 3/4” standard
DOOR WIDTH: 36”, can be field sized to 30” (48” available)
MOUNTING HEIGHT: Recommended installation at 41″ from finished floor to center line of push rail
FASTENERS: Furnished with sheet metal and machine screws
CYLINDER: Accepts all key trims cylinder
DOGGING: 1/2 turn hex key
FIRE RATED: Available – please specify
FINISHES: Aluminum, Duronotic, and Stainless Steel

Click here to view Exit Device Trims

Surface Vertical Rod TH1100EDSV
Global Series TH1100EDSV Surface Vertical Rod panic device is the perfect choice for double doors without mullions. Reversible for right for left hand doors, they are ideal for new construction or renovations. Our EDSV panics can be used in conjunction with any of our exit device trims listed below.
Grade – ANSI A156.3 Grade 2
Warranty – 10 years
Specifications:

MATERIAL: Extruded anodized aluminum push bar, stainless steel springs
LATCH: Top pullman type, Bottom bolt assembly
DOOR HEIGHT: 7’ standard
BACKSET: 2 3/4” on 4 1/2” minimum stile width – if less than 4 1/2″ backset becomes half of the exposed stile width
STRIKE: Top – surface mounted, Bottom – flat mortise or into threshold, vertical/rim application use DBLST double dr. strike
PROJECTION: 2 1/2” – 1 7/8” dogged
STILE: 4 1/2” minimum
DOOR THICKNESS: 1 3/4” standard
DOOR WIDTH: 36”, can be field sized to 30”
MOUNTING HEIGHT: Recommended installation at 41″ from finished floor to center line of push rail.
FASTENERS: Furnished with sheet metal and machine screws
CYLINDER: Accepts rim, all trims Schlage “C” keyway
DOGGING: 1/2 turn hex key
FIRE RATED: Available – please specify
FINISHES: Aluminum, Duronotic, and Stainless Steel